Start a conversation

Case study, Telangana

Remote valve control in a city water network

Ilonnati fitted remote valve control to existing valves in an urban water distribution network. Operators see the state of each connected valve and open, close or schedule it from the control room, where before each change meant sending a crew.

Client
A city water utility
Sector
Water utilities, government

IoTyX for a water network. An illustration with sample data, not a screenshot of this deployment.

Before and after

The same work, as it was done before and as it runs now.

Before

  • Valves were opened and closed by hand, by crews travelling to each one.
  • There was no live view of which valves were open.

After

  • Operators open, close and schedule a connected valve without a site visit.
  • The state of each connected valve shows in the control room.

What Ilonnati delivered

Hardware in the field and the platform to run it, from one company.

  • Actuators on existing valves

    Motorised actuators fitted to the valves in place, with no change to the pipes.

  • A controller at each valve

    Each valve linked to the platform through an Ilonnati controller.

  • Live valve status

    The position of every connected valve visible to operators as it changes.

  • Control room

    Valves opened, closed and scheduled from the control room.

How each valve was fitted

An actuator on the existing valve, wired to a controller beside it. Red marks what Ilonnati fits; the rest was already there.

Motorised actuator fitted to an existing valveA line drawing of a valve on a flanged pipe, seen from the side. The pipe, its flanged joints, the valve body and the valve stem, drawn in navy, were already in place. Drawn in red, Ilonnati fits a mounting bracket on top of the valve, a coupling onto the stem and a motorised actuator on the bracket, with a cable running from the actuator to an Ilonnati controller standing nearby. Nine numbered balloons point to the parts named in the parts list, which groups them into what was already in place and what Ilonnati fits.123456789
Parts list
No.PartWhat it does
Already in place
1PipeStays as it is: no change to the pipes.
2Flanged jointThe valve’s joint to the pipe, left untouched.
3Valve bodyThe valve already in the network.
4StemOpens and closes the valve, now turned by the actuator.
Fitted by Ilonnati
5Mounting bracketHolds the actuator on the valve.
6CouplingJoins the actuator to the stem.
7Motorised actuatorOpens and closes the valve remotely, on command or on a schedule.
8CableConnects the actuator to the controller.
9Ilonnati controllerLinks the valve to IoTyX, where its state is shown.
TitleMotorised actuator on an existing valve
ViewElevation
ScaleNot to scale

Questions buyers ask

Not answered here?

Ask about your own network, plant or campus. An engineer will reply.

Start a conversation
01Do the pipes or valves have to be replaced?

No pipe is replaced. Where a valve is in working order, a motorised actuator is fitted to it and a controller is placed beside it.

02Can operators work from a phone?

Yes. The IoTyX mobile app shows the network and lets authorised operators open or close valves and start pumps. Each command is confirmed before it is sent, and logged.

03What happens if a site loses its connection?

The controller keeps its readings while the connection is down and sends them when it returns.

04Who can see and operate what?

Access is set by role. Administrators, engineers and operators each see the sites and zones they are responsible for, and only authorised people can send commands. Assets can also be shared with a contractor or partner.

Start a conversation

Tell us what you need to connect, monitor or control